1. The start-up sequence of the insulating glass production line: first check that there is sufficient water in the water tank of the insulating glass processing equipment, then turn on the water pump, and adjust the water spray pipe above the white sponge roller to ensure that all positions of the sponge from the tight and attached rollers can be rinsed arrive.

Horizontal Glass Washing Machine

Then clean the impurities and dirt on the sponge roller by hand, and ensure that the sponge roller is completely foamed and expanded. Note that when opening the insulating glass production line in winter, be sure not to open the cleaning conveyor first. Because two adjacent sponge rollers will be frozen together in winter, opening the transmission without being soaked will cause the sponge rollers to be torn.

2. Then turn on the cleaning transmission, put the hollow glass to be processed on the transmission wheel, pay attention to the glass must be placed stably, to prevent the glass from falling and hurting people during the transmission process

3. The butyl glue applied on the aluminum spacer should be uniform and applied on the entire surface of the aluminum strip to prevent glue leakage and burrs. And high-quality butyl glue is used to ensure that the aluminum strip and the glass quilt stand firmly together. After the aluminum spacer is coated with glue, it is forbidden to stick dust.

4. The two-component sealantshould be applied firmly, and the surface should be kept smooth, especially at the corners to prevent air leakage and outgassing.The above precautions for the use of insulating glass processing equipment must be strictly followed.